Fol-Da-Tank

Aluminum Low-Flow Strainer Low Level

Aluminum Low-Flow Strainer Low Level

Features

  • Professionally designed and engineered for maximum pumping capacity
  • Al-mag castings — proven to be the toughest in the industry
  • The Low-Flow™ Low-Level will perform at maximum pumping capacity down to a water level of 1.5”-2” depending on your setup area
  • Flow Rate — Tested with 6” Low-Flow™
  • Low-Level rate is 1500-2000 GPM. The flow rates may vary due to the design of the pumper and the setup area of your pumper and FOL-DA-TANK
  • Use of a male and female SST flange mounted on the side wall of your FOL-DA-TANK will eliminate the lifting factor when pumping from the side of the tank
  • Long handle swivels with standard NH or NPSH threads
  • Surface turbulence will not affect this strainer
  • Optional 1.5” water transfer device available in sizes 4”-6” (Must specify when ordering)
  • Each unit is fully guaranteed
  • The Low-Flow™ Low-Level is easily stored in truck compartments and can be reattached to hard suction hose (NFPA 1142 compliant)
Part No.

Dimensions

in/mm

Weight

lb/kg

LFS 2.5

10″x10″x8 1/2″/250x250x220

7/3
LFS 3.0

10″x10″x8 1/2″/250x250x220

8/4
LFS 4.0

16″x13″x12″/410x330x310

23/11
LFS 4.5

16″x13″x12″/410x330x310

23/11
LFS 5.0

16″x13″x12″/410x330x310

24/11
LFS 6.0

16″x13″x12″/410x330x310

24/11

 

  *Part number shown for housing with National Standard Threads (NST).  Other Housing available.*Dimensions are measured with nozzle in lowered position.