Portable FOL-DA-TANK

THANKS FOR VISITING US AT THE FDIC!
SEE YOU AT THE F.R.I. (CHICAGO, IL)
AUGUST 25TH - 27TH


New and Improved
Easy lift liner pick up grab handles.
Standard on all Fol-Da-Tanks and
Self-Supporting Tanks. Grab
handle add on kits also available.

  • About FOL-DA-TANK
  • Photos and Videos
  • Portable Water Tanks
  • Strainers & Accessories
  • Holders
  • Covers
  • Secondary Containment
  • New Products
  • Aerial Firefighting
  • Location
  • Information
  • Environmental
  • News
  • Links
  • Home
      

Supply Line Holder

 
Couples supply hose securely to any portable water tank

Features:

  • Added filling source
  • Minimizes waste and turbulence
  • Frees up manpower for other important duties
  • Aluminum casting
  • NST and Storz available
  • Pump tested to 200 PSI for single supply line holder
  • Round or square housing designs available
    (NFPA 1142 Compliant)

    *See photo gallery for video*

 

Part No. Sizes
SLHS-2.5 2 1/2" / 6cm
SLHS-3 3" / 8 cm
SLHS-4.0 4" / 10 cm
SLHS-5.0 5" / 12.7 cm
SLHD-2.5 (Dbl.) 2 1/2" / 6 cm
SLHD-3 (Dbl.) 3" / 8 cm
SLHD-2.5 / 3 2 1/2" - 3" / 6-8 cm

 

 

 

 

 

 

 

4" - 5" Supply Line Holder

 The 4" - 5" holder clamps easily to any portable water tank.  The design helps to free hands of the firefighter, prevents waste and turbulence.

Construction Features:

  • 6061-T6 Aluminum tube 356 cast aluminum couplings
  • Convenient quick clamping with safety pins

*See photo gallery for video*

 

 

THE "CONNECTOR"

 Connect Two (or more) Fol-Da-Tanks Together

Shown with 40" long drain sleeve


   


   

              
 When ordering a new tank or liner for use with the Connector make sure to specify  your equalizer sleeve with the 40" length.           
 
Features:     
 
  • No priming necessary
  • Equalizes water levels
  • Easily stored
  • Rugged aluminum castings
  • 10" standard size        
 
Part No. Size
PTCS-10 10" / 25cm

 

 Bar Sleeve Clamp
Controls water flow between tanks


Part No. BSLC

 

 

Intergrated Bar Clamp
PATENT PENDING

 Bar clamp shown in stored locked position.  Bar clamp shown in open position.

New and improved frame with intergrated bar clamp.  (Patent Pending)  Eliminates loose pieces of equipment.  The intergrated bar clamp is specifically used when transfering water from one FOL-DA-TANK to another with the use of a tank connector.

 

 

Smoke Ejector Holder w/Hooks Included


Part No. SEH

Made from high tensile alloy for maximum strength.  Locking action permits adequate pressure to secure the smoke ejector against door jambs or window frames.  Rubber cushion and pads remain pliable down to -40° fahrenheit.

Features:

  • For dorway or window
  • Quick adjusting
  • 28" to 40" / 71 to 101 cm
  • Rapid placement
  • Lightweight (8lbs / 3.6KG)

  


Hard Suction Hose Support

  

 

This light weight aluminum hose stand is designed to support a large diameter hose when filling and draining a Self-Supporting Tank or Rol-LaTank®.  This hard suction hose support stores easily in limited spaces or the Rol-La-Tank® storage bag.

 

 

 

 

Fol-Da-Tank
1275 W. 11th Street - P.O. Box 110 Milan, IL 61264
1-800-637-8265 or 309-787-3500 Fax: 309-787-3635
email: info@fol-da-tank.com

Copyright © 2010 Fol-Da-Tank. All rights reserved.